Photograph Courtesy of Baker Perkins Photograph Courtesy of Baker Perkins Photograph Courtesy of Baker Perkins
Photograph Courtesy of Baker Perkins

Submit Your Measurements Online!

Machine No. Or Designation:
Make:
Model:
A. Shaft Diameter 3 " from face to stuffing box.
     1.
     2.
     3.
     4.
B. Axial space from face of stuffing box to first obstruction.
C. Depth of stuffing box and size packing used.
D. Bolt circle of gland bolts, number of holes, size and pitch of gland bolts, depth of threaded hole.
E. Radial space from shaft to first radial obstruction measured 3 inches from face of stuffing box.
F. Outside diameter of stuffing box.
G. Total indicated runout of each shaft-measured 3 inches
from face to stuffing box. (This measurement is critical if
runout exceeds .060").
     1.
     2.
     3.
     4.
Note:      It is quite common for the shafts to have a hard surface material applied to the packing area, often times beginning close to the blade and ending just beyond the face of the stuffing box. If this is the case on your machine, please record how far beyond the stuffing box face it extends and any diametrical difference. Also, if there is a shoulder machined on the shaft between the face of the stuffing box and the first obstruction, please record where it occurs (from the face of the stuffing box) and the diametrical difference
Personal Information:  
Company Name:
First Name:            Last Name:    
Address:   
City:               State:              Zip:   
Phone: (Daytime)                (Evening)   
E-mail Address:    
 


home | history | what is sealpax? | why sealpax? | proven performance
other uses | diagrams | measurement | contact
© 2000 Sealpax L.L.C. © 2000 site design / hosting by EZNET

Click Here to See Diagram